Purpose
The purpose of Wi-Fi is to hide complexity by enabling wireless access to applications and data, media and streams. The main aims of Wi-Fi are the following:
- make access to information easier
- ensure compatibility and co-existence of devices
- eliminate cabling and wiring
- eliminate switches, adapters, plugs, pins and connectors.
Uses
In addition to restricted use in homes and offices, Wi-Fi can make access publicly available at Wi-Fi hotspots provided either free of charge or to subscribers to various providers. Organizations and businesses such as airports, hotels and restaurants often provide free hotspots to attract or assist clients. Enthusiasts or authorities who wish to provide services or even to promote business in a given area sometimes provide free Wi-Fi access. Metropolitan-wide Wi-Fi (Muni-Fi) already has more than 300 projects in process.[2] There were 879 Wi-Fi based Wireless Internet service providers in the Czech Republic as of May 2008.[3][4]
Wi-Fi also allows connectivity in peer-to-peer (wireless ad-hoc network) mode, which enables devices to connect directly with each other. This connectivity mode can prove useful in consumer electronics and gaming applications.
When wireless networking technology first entered the market many problems ensued for consumers who could not rely on products from different vendors working together. The Wi-Fi Alliance began as a community to solve this issue — aiming to address the needs of the end-user and to allow the technology to mature. The Alliance created the branding Wi-Fi CERTIFIED to reassure consumers that products will interoperate with other products displaying the same branding.
Many consumer devices use Wi-Fi. Amongst others, personal computers can network to each other and connect to the Internet, mobile computers can connect to the Internet from any Wi-Fi hotspot, and digital cameras can transfer images wirelessly.
Routers which incorporate a DSL-modem or a cable-modem and a Wi-Fi access point, often set up in homes and other premises, provide Internet-access and internetworking to all devices connected (wirelessly or by cable) to them. One can also connect Wi-Fi devices in ad-hoc mode for client-to-client connections without a router.
As of 2007 Wi-Fi technology had spread widely within business and industrial sites. In business environments, just like other environments, increasing the number of Wi-Fi access-points provides redundancy, support for fast roaming and increased overall network-capacity by using more channels or by defining smaller cells. Wi-Fi enables wireless voice-applications (VoWLAN or WVOIP). Over the years, Wi-Fi implementations have moved toward "thin" access-points, with more of the network intelligence housed in a centralized network appliance, relegating individual access-points to the role of mere "dumb" radios. Outdoor applications may utilize true mesh topologies. As of 2007 Wi-Fi installations can provide a secure computer networking gateway, firewall, DHCP server, intrusion detection system, and other functions.
Advantages and challenges
Operational advantages Wi-Fi allows LANs (Local Area Networks) to be deployed without cabling for client devices, typically reducing the costs of network deployment and expansion. Spaces where cables cannot be run, such as outdoor areas and historical buildings, can host wireless LANs.
2008, wireless network adapters are built into most modern laptops. The price of chipsets for Wi-Fi continues to drop, making it an economical networking option included in ever more devices. Wi-Fi has become widespread in corporate infrastructures.
Different competitive brands of access points and client network interfaces are inter-operable at a basic level of service. Products designated as "Wi-Fi Certified" by the Wi-Fi Alliance are backwards compatible. Wi-Fi is a global set of standards. Unlike mobile telephones, any standard Wi-Fi device will work anywhere in the world.
Wi-Fi is widely available in more than 220,000 public hotspots and tens of millions of homes and corporate and university campuses worldwide.[5] WPA is not easily cracked if strong passwords are used and WPA2 encryption has no known weaknesses. New protocols for Quality of Service (WMM) make Wi-Fi more suitable for latency-sensitive applications (such as voice and video), and power saving mechanisms (WMM Power Save) improve battery operation.
Limitations
Spectrum assignments and operational limitations are not consistent worldwide. Most of Europe allows for an additional 2 channels beyond those permitted in the U.S. for the 2.4 GHz band. (1–13 vs. 1–11); Japan has one more on top of that (1–14). Europe, as of 2007, was essentially homogeneous in this respect. A very confusing aspect is the fact that a Wi-Fi signal actually occupies five channels in the 2.4 GHz band resulting in only three non-overlapped channels in the U.S.: 1, 6, 11, and three or four in Europe: 1, 5, 9, 13 can be used if all the equipment on a specific area can be granted not to use 802.11b at all, even as fallback or beacon. Equivalent isotropically radiated power (EIRP) in the EU is limited to 20 dBm (0.1 W).
Reach
Due to reach requirements for wireless LAN applications, power consumption is fairly high compared to some other low-bandwidth standards. Especially Zigbee and Bluetooth supporting wireless PAN applications refer to much lesser propagation range of <10m>
Wi-Fi networks have limited range. A typical Wi-Fi home router using 802.11b or 802.11g with a stock antenna might have a range of 32 m (120 ft) indoors and 95 m (300 ft) outdoors. Range also varies with frequency band. Wi-Fi in the 2.4 GHz frequency block has slightly better range than Wi-Fi in the 5 GHz frequency block. Outdoor range with improved (directional) antennas can be several kilometres or more with line-of-sight.
Wi-Fi performance decreases roughly quadratically as the range increases at constant radiation levels.
Mobility
Because of the very limited practical range of Wi-Fi, mobile use is essentially confined to such applications as inventory taking machines in warehouses or retail spaces, barcode reading devices at check-out stands or receiving / shipping stations. Mobile use of Wi-Fi over wider ranges is limited to move, use, move, as for instance in an automobile moving from one hotspot to another. Other wireless technologies are more suitable as illustrated in the graphic.
Threats to security
The most common wireless encryption standard, Wired Equivalent Privacy or WEP, has been shown to be easily breakable even when correctly configured. Wi-Fi Protected Access (WPA and WPA2), which began shipping in 2003, aims to solve this problem and is now available on most products. Wi-Fi Access Points typically default to an "open" (encryption-free) mode. Novice users benefit from a zero-configuration device that works out of the box, but this default is without any wireless security enabled, providing open wireless access to their LAN. To turn security on requires the user to configure the device, usually via a software graphical user interface (GUI). Wi-Fi networks that are open (unencrypted) can be monitored and used to read and copy data (including personal information) transmitted over the network, unless another security method is used to secure the data, such as a VPN or a secure web page. (See HTTPS/Secure Socket Layer.)
Population
Many 2.4 GHz 802.11b and 802.11g Access points default to the same channel on initial startup, contributing to congestion on certain channels. To change the channel of operation for an access point requires the user to configure the device. Yet, this default use of channels 1, 6 and 11 gives better performance than "advanced" users choosing channels 2, 5, 7 and 9 as "unused, free".
Channel pollution
Standardization is a process driven by market forces. Interoperability issues between non-Wi-Fi brands or proprietary deviations from the standard can still disrupt connections or lower throughput speeds on all user's devices that are within range, to include the non-Wi-Fi or proprietary product. Moreover, the usage of the ISM band in the 2.45 GHz range is also common to Bluetooth, WPAN-CSS, ZigBee and any new system will take its share.
Wi-Fi pollution, or an excessive number of access points in the area, especially on the same or neighboring channel, can prevent access and interfere with the use of other access points by others, caused by overlapping channels in the 802.11g/b spectrum, as well as with decreased signal-to-noise ratio (SNR) between access points. This can be a problem in high-density areas, such as large apartment complexes or office buildings with many Wi-Fi access points. Additionally, other devices use the 2.4 GHz band: microwave ovens, security cameras, Bluetooth devices and (in some countries) Amateur radio, video senders, cordless phones and baby monitors, all of which can cause significant additional interference. General guidance to those who suffer these forms of interference or network crowding is to migrate to a Wi-Fi 5 GHz product, (802.11a, or the newer 802.11n if it has 5 GHz support) as the 5 GHz band is relatively unused and there are many more channels available. This also requires users to set up the 5 GHz band to be the preferred network in the client and to configure each network band to a different name (SSID). It is also an issue when municipalities,[6] or other large entities such as universities, seek to provide large area coverage. This openness is also important to the success and widespread use of 2.4 GHz Wi-Fi.
by : http://en.wikipedia.org/wiki/Wi-Fi
A wireless access point connects a group of wireless devices to an adjacent wired LAN. An access point is similar to a network hub, relaying data between connected wireless devices in addition to a (usually) single connected wired device, most often an ethernet hub or switch, allowing wireless devices to communicate with other wired devices. 
.jpg)